Outdoor Pole Banners, 2-Sided

Outdoor Pole Banners are the ones you see hanging from the side of lamp and street posts. The top and bottom of these banners are secured via pole pockets to rods affixed to the poles with ties thru the grommets keep them from sliding off, or, if it is a large vinyl banner, finished with pole pockets so that it can be used in a parade or be a hanging banner.

Designed as small-ish vertical banners, these can add impact for your message in places that are sure to be noticed by pedestrians and drivers alike, or, if a larger size is selected, used when marching in parades.

If you are uploading a print-ready design, please create your artwork to reflect the finished size of the pole banner. We will make any necessary adjustments for the hem & pockets.

PLEASE NOTE: There are two ways to discuss pole pocket sizes:
1. The diameter of the pole over which the pocket will fit, or
2. The flat-measure size of the pocket from the edge of the material to the bottom of the seam.

Our default Pocket size is 3" Flat-Measure. This will fit over a 1.25"-diameter pole.

If you require a special pole pocket size, please write in the desired pocket size, OR the diameter of the pole it needs to fit on in the Notes of your order, and we will be happy to accommodate your request. Examples of how to enter notes for an order may be found here.

Below is a chart showing coordinating pocket sizes and pole diameters.

This 2-sided banner comes with pole pockets top and bottom and grommets in seams in all four corners. Printed on eSigns outdoor vinyl, with an optional pole banner kit (not included) to make hanging banners from lamp posts and utility poles as easy as can be.

eSigns Outdoor Pole Banners are custom printed at 600dpi on one side of our 18 oz. premium vinyl material. The UV Inks we use ensure bright vivid colors for your signs.

Outdoor Pole Banner Specifications:

• Orientation
  Portrait or Landscape
• Use
  Outdoor
• Material
  18 oz. Premium Vinyl Banner, Matte Finish
• Finishing
  Standard 3" Flat-Measure Stitched Pole Pockets installed at top and bottom. (A 3" Flat-Measure Pocket accommodates up to a 1.25"-diameter pole.) Nickel Grommets in seams on all four corners.
• Installation
  Use pole pockets slide over pole posts and tie around the main pole through the grommets secure the banner to the pole. We recommend our awesome Mesh Banners as a compliment for over the street banner use.
• Suggested Uses
  Pole Banners, Hanging Banners

Custom Printing Information:

• Printing
  Full Color, Digital CMYK UV Process at 600dpi
• Sides
  Printed on Both Sides
• Bleeds
  All artwork should be the size of the finished pole banner. Please keep important artwork 4" from edges that will have pockets.
• Templates
  Download Outdoor Pole Banner Template