Single-Sided Pole Banners
Our 13 oz. 1-sided Pole Banner is printed on our 13 oz. vinyl at 600 dpi with a 6 Color Digital Process. It's then finished with 3" flat-measure pole pockets on top and bottom, and grommets installed in the seams in all 4 corners. These banners are excellent for easy hanging when indoor signage is needed. These can also be used outdoors, but only for temporary use as the 13 oz. material is not designed for long-term exposure to the elements. If you need a sturdier outdoor solution try our Outdoor Pole Banners.
If you are uploading a print-ready design, please create your artwork to reflect the finished size of the pole banner. We will make any necessary adjustments for the hem & pockets. Â
PLEASE NOTE: There are two ways to discuss pole pocket sizes:
1. The diameter of the pole over which the pocket will fit, or
2. The flat-measure size of the pocket from the edge of the material to the bottom of the seam.
Our default Pocket size is 3" Flat-Measure. This will fit over a 1.25"-diameter pole.
If you require a special pole pocket size, please write in the desired pocket size, OR the diameter of the pole it needs to fit on in the Notes of your order, and we will be happy to accommodate your request. Examples of how to enter notes for an order may be found here.
Below is a chart showing coordinating pocket sizes and pole diameters.
Single Sided Pole Banner Specifications:
OrientationPortrait or Landscape
UseIndoor; Extended outdoor use not recommended
Material13 oz. Vinyl, Gloss Finish
FinishingStandard 3" Stitched Flat-Measure Pole Pockets installed at top and bottom (3" Pocket accommodates up to a 1.25" Diameter pole). Nickel Grommets in seams on all four corners
InstallationUse pole pockets slide over pole posts and tie around the main pole through the grommets secure thebanner to the pole. We recommend our awesome Mesh Banners as a compliment for over the street banner use.
Suggested UsesPole Banners, Hanging Banners
Custom Printing Information:
PrintingFull Color, Digital 6 Color CMYKLcLm UVInk at 600dpi
SidesPrinted on 1 Side
BleedsAll artwork should be the size of the finished pole banner. Please keep important artwork 4" from edges that will have pockets.