X-STAND SET-UP GUIDE

01 - This is how your stand will look when it arrives and is unpacked.

X-00

02 - Connect rods so that you have a combined total of four [4].

03 - Insert the non-hooked ends of the four rods each into a hole on the circular metal hub.

X-01

04 - Attach banner to hooks on the upper arms first, then the lower.

X-02

05 - Bend the central metal pole just below the circular metal hub backwards to stabilize the stand as needed.

X-03

06 - YOUR SINGLE-SIDED X-STAND IS READY TO USE!

X-04