ONE-SIDED SILVERWING RETRACTABLE BANNER SET-UP GUIDE

01 - Contents: Two [2] three-piece poles and a base.

SwRW1-00

02 - Assemble both of the three-piece poles.

SwRW1-01

03 - Insert the ends of both poles without the plastic holders into the two holes located on the top of the base.

SwRW1-02

04 - Pull banner out of the base by its top bar (the banner beam), raising it toward the tops of the poles.

SwRW1-03

05 - Slide the plastic holders at the top of each pole into the slot on the back of the banner beam.

SwRW1-04

06 - YOUR 78.7""×47.2" SILVERWING RETRACTABLE SINGLE-SIDED BANNER STAND IS READY TO USE!

SwRW1-05

TWO-SIDED SILVERWING RETRACTABLE BANNER SET-UP GUIDE

01 - Contents: Two [2] three-piece poles and a base.

SwRW2-00

02 - Assemble both of the three-piece poles.

SwRW2-01

03 - Insert the ends of both poles without the plastic holders into the two holes located on the top of the base.

SwRW2-02

04 - Pull the first banner out of the base by its top bar (the banner beam), raising it toward the tops of the poles.

SwRW2-03

05 - Slide the plastic holders at the top of each pole into the slot on the back of the banner beam.

SwRW2-04

06 - Repeat Step 3 with the second banner, then proceed to Step 7.

SwRW2-05

07 - Repeat Step 6 with the second banner.

SwRW2-06

08 - YOUR 78.7""×47.2" SILVERWING RETRACTABLE DOUBLE-SIDED BANNER STAND IS READY TO USE!

SwRW2-07