L STAND BANNERS SET-UP GUIDE

01 - Contents: One [1] three-piece pole, one [1] base (L bracket with bolt), and two [2] clip bars (already attached to the banner before shipping).

LS-00

02 - Assemble the three-piece pole.

LS-01

03 - Screw bottom of three-piece pole onto bolt at the bottom of the L-bracket base.

LS-02

04 - Unroll banner and lay it out flat, face down. Insert tab from base into the slot on the banner's bottom clip bar.

LS-03

05 - Insert tab at top of pole into the slot on the back of the banner's top clip bar.

LS-04

06 - Adjust tension-nuts on the bottom side of the lower clip bar to stabilize the stand as needed.

LS-05

07 - YOUR 72"×24" L-STAND IS READY TO USE!

LS-06